Optoma S310 Instrucciones de operaciones descargar pdf (Pagina 22)

EN-22

Connecting a composite Video source device

Examine your Video source device to determine if it has a set of unused

composite Video output sockets available:

 If so, you can continue with this procedure.

 If not, you will need to reassess which method you can use to connect to

the device.

To connect the projector to a composite Video source device:

1. Take a Video cable and connect one end to the composite Video output

socket of the Video source device.

2. Connect the other end of the Video cable to the

VIDEO

socket on the

projector.

Important



If the selected video image is not displayed after the projector is turned on and

the correct video source has been selected, check that the Video source

device is turned on and operating correctly. Also check that the signal cables

have been connected correctly.



You need only connect to this device using a composite Video connection if

Component Video and S-Video inputs are unavailable for use. See

“Connecting Video source devices” on page 20 for details.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 69 70

Sin comentarios

Optoma S310 Instrucciones de operaciones Pagina 22